Central heating not working [7 simple solutions] - Air permeable (2023)

Is your central heating not working? The last thing you want to do is come home or wake up on a cold night to find your central heating not turning on. There are days in winter that can be close to freezing and if on one of those days the heating stops working, you and your loved ones can certainly feel miserable cold.

Don't ignore the fact that your central heating isn't working, not only can it make you feel uncomfortable in the cold, but it's also unhealthy for you and your pets.

There are many reasons why your central heating is not working, some are 'simple' solutions you can get and get your heating back on, while other problems require professional help.

In this guide, I have compiled the common reasons why your central heating is not working properly or not working at all. And as always, we also provide possible solutions for each of the problems. When we feel that you may need to seek help from HVAC professionals, we encourage you to do so accordingly.

Why is my central heating not working?

There are numerous reasons for your thirstThe heating may have stopped working. To resolve your heating issues quickly, be sure to check the following possible issues.

1. Heater power switch is off

If your heater isn't working, the first thing to do is check and turn off the heater switch. If it's off, turn it on.

Heating system circuit breakers are often turned off by mistake or accidentally. If you were recently in the attic collecting Christmas decorations, or if one of the technicians worked near your stove, your switch may have been accidentally turned off. If you check and find that the power switch is on, proceed to the next step.

2. Check your heater's circuit breaker

The quickest way to fix a central heating not working problem is to check the circuit breaker first. Make sure the heater breaker has not tripped. If that's the case, the reset should get the heater working again.

Heating systems have built-in safety measures. So if there was an overheating or power surge somewhere in the electrical wiring, the circuit breakers may have tripped. And if the breakers trip again after you reset them, it's a sign that there may be a serious issue that needs to be addressed. In that case, it's appropriate to call a licensed professional HVAC technician to have a look.

3. Check your oven's air filters for dirt

Now that you've checked the power switch and heater breakers and everything looks good, now it's time to check the HVAC air filters. Dirty or clogged air filters cause a number of problems with your heating system. If your heater does not turn on, skip this step.

Clogged air filters restrict airflow to the heater, and when this happens, two things can happen:

1. There is not enough air in the heat exchanger to heat up. Too little air in the heat exchanger means that less air has been heated. As less air heats up, yourThe oven does not blow hot air.
2. And if airflow to the heater is restricted, it will cause the system to overheat. If overheating occurs, your central heating safety measure will shut down your heating system to protect critical parts from damage. In this case, the fan can still blow cold.

However, if your heater turns on but doesn't blow hot air, it's best to follow this tip. Air filters remove dirt, pollen and other substances before air enters the stove or heat pump. You protect other components of your heating system, e.g. B. the blower.

If your environment is very dusty and you have pets at home, the air filters can easily become dirty or clogged. By doing this, they restrict the entry of air into the oven, which needs to heat up. Therefore, no hot air will come out of the vents.

If you don't replace dirty air filters with clean ones, your system will overheat and eventually shut down, sometimes leading to failure.short cycle oven. For safety reasons, remember to turn off the system to check the condition of the air filters. And when you're done, close the door. If the port is not properly closed, your system will not boot.

The standard recommended period of use for air filters before replacement is 3 months. Filters are inexpensive, and if you have pets around, you can replace them more often to maintain system efficiency.

4. Check for thermostat issues

Another common reason your HVAC system won't work is a thermostat that isn't working properly or isn't set correctly. However, before checking to see if the thermostat is faulty, make sure the thermostat batteries are not dead or weak.

Of course, there is a thermostat to regulate the heat on your stove. However, over the years, like any other device, your thermostat may need some repair or possibly replacement.

If the batteries are good but there is still a problem with the thermostat, the thermostat may not be programmed correctly. You might accidentally set it to a point you don't want.

So what should you do with a thermostat that won't turn on the heat? The best solution for this is to make sure the thermostat is set correctly. If you are not comfortable with something, it is advisable to consult an authorized technician.

5. Low refrigerant level in your HVAC system

you use aheat pump systemto heat your home? If your answer is yes, then this tip is for you. When the coolant level is low or there are leaks in the HVAC system, two things can happen:

1. Heater turns on but blows cold air: This is because the coolant transfers heat between the outside air and the inside of your home. Therefore, if there is no more coolant, then there will be no heating in your house. Although the fan may continue to run, only cool air comes out of the vents.

2. HeCompressor can overheatand then it fails where there is no coolant and the problem is not resolved. In this case, the system is completely turned off.

6. Fan condenser is not working

The fan capacitor is responsible for turning on the furnace. Once the setpoint on the thermostat is reached, the condenser will turn the oven on. Unfortunately, if your oven is old, so is the blower condenser if it has never been replaced before. If you think you may have a dead fan capacitor, consider replacing it. But before doing thatTo do this, contact an HVAC professional..

7. Central heating does not work - check fan motor

The fan motor blows hot air from the stove into your home. Sometimes the fan motor can fail for a variety of reasons including dirty air filters. When the fan motor stops working, there will be no air in your home. You can tell if the fan motor has a problem if its wheels turn slowly and shut off immediately.

8. Dirty flame sensors

Dirty flame sensors are common causes of central heating not working. An oven flame sensor is a straight or L-shaped metal rod located behind the burners.

Flame sensors are designed to detect flames in your oven. If they can't see any flames within about 10 seconds, they close the gas valve to prevent gas from entering your home. A dirty flame sensor can also be yoursOven to start short cycles.

Over the years, dirt and other substances can build up on the sensors, making it difficult to detect flames. See how to clean them.

• Turn off the oven with the on/off button or thermostat.
• Remove the metal cover and locate the flame sensor.
• If there is a lot of debris on the sensor, gently rub it with steel wool or sandpaper.
• When finished, place the sensor in position before turning on the oven.

FAQ about central heating not working

Solution:If the thermostat runs on batteries and is not working properly, replace the batteries. If that doesn't help, call a professional to have a look.

Solution:routineKeeps your stove or heater in good working order. Check the oven air filters for dirt. If so, change them. You should replace your HVAC air filters at least every 3 months.

SSolution: Quickly check if the air filters are dirty. You must replace them when they are dirty. This should fix this issue.

Why is my central heating blowing cold air?

If your central heating is blowing cold air instead of hot air, it could be one of the following signs.

• Your fan is set to "ON". Set it to "Heat" or "Auto" to fix this issue.
• If you are using the heat pump this could be a sign that the refrigerant is low or leaking.Call an HVAC technicianCome and check the coolant charge.

How to reset my central heating system?

You can reset your heating system as follows.

1. Turn off the oven with the power switch or by tripping the circuit breaker.
2. Locate the oven reset button, which is usually located in the fan compartment.
3. Press the reset button down if it appears.
4. Replace the fan compartment cover.
5. Turn on the oven.

What to check if the heating does not work?

If your central heating isn't working, this is the first thing to check.

1. Make sure your oven's power switch is turned off. If it is not in the off position but the heater still does not work, check the circuit breaker to see if it has tripped. If it was activated, restart it.
2. Your Thermostat – Make sure your thermostat is set correctly. If you are using a programmable thermostat, make sure it is programmed correctly.
3. air filter. They are located in the return channels. Check them and find out if they are dirty. If so, replace them. Remember to change the air filters every 3 months.

Final thought on central heating not working

There could be many reasons why your home's central heating is not working, but the ones discussed in this article are the most common. Before calling the HVAC experts, try out the potential solutions we've provided in this article. You will be amazed how quickly it will solve your heating problems.

resources

https://www.aireserv.com/about/blog/2020/november/why-does-my-furnace-keep-tripping-the-reset-butt/